Skip to content
(817) 589-7101

Irving · Dallas County

Hydraulic Hose Repair & Replacement in Irving, TX

A1 Hydraulic Power Solutions provides hydraulic hose repair & replacement for Irving from our Fort Worth shop — 19 miles away, about 22 minutes by road. Same-day turnaround on most work, fair quotes checked against real stock, and a counter that answers the phone: (817) 589-7101.

Irving fleets — refuse trucks, rental equipment, ground support — send us their repeat hose work because we keep the fittings their mixed European and domestic equipment actually needs.

Get a quote(817) 589-7101

Route card — Irving

Distance
19 mi
Drive time
≈ 22 min
From
Fort Worth 76118
County
Dallas

Serving Irving's DFW airport logistics, construction, waste and recycling operations.

Scope

What Irving crews get.

  • Match and replace failed assemblies from the hose itself — no drawing needed
  • Crimp wire-braid and spiral hose from -4 through -32
  • JIC, ORFS, flat-face, NPT, BSP, DIN metric, and flange ends in stock
  • Abrasion sleeve, spring guard, and correct routing on request
  • Cleanliness: capped, blown-out assemblies ready to install

Process

How it goes.

  1. 01

    Identify

    We read the layline or measure the old hose and ends — thread gauges and calipers, not guesswork.

  2. 02

    Build

    Hose cut to length, ends crimped to manufacturer spec, and marked.

  3. 03

    Verify

    Crimp diameter checked against spec before it leaves the bench.

Hydraulic Hose Repair & Replacement in Irving — FAQs

Do you offer hydraulic hose repair & replacement in Irving?

Yes — Irving is inside A1's core service area, 19 miles (about 22 minutes) from our shop at 2201 Handley Ederville Road, Fort Worth. Counter service, delivery, and on-site work are all available during business hours.

How fast can A1 respond to Irving?

Parts and assemblies are usually ready same-day at the counter; for on-site work in Irving, response typically falls within the same business day — call (817) 589-7101 for a real-time answer.

Which Irving industries does A1 support?

Irving work commonly comes from DFW airport logistics, construction, waste and recycling operations — plus any crew running hydraulic equipment in Dallas County.

Can you make a hydraulic hose while I wait?

Yes. Most single assemblies are built in 15–30 minutes at our Fort Worth counter during business hours, including oddball thread conversions.

Do I need to know the part number of my hose?

No. Bring the failed assembly (or clear photos of both ends and the layline) and we'll identify the hose type, size, and fittings from it.

What pressure ratings can you build to?

From 1-wire return lines up through 6-spiral hose rated 5,000–6,000 psi working pressure, plus SPIR STAR ultra-high-pressure lines by quote.